Step
1
Place the cover
on the box spring,
foundation, or platform with quilted side up. The mattress label
should be at the foot of the bed. Unzip and remove the quilted
top panel. Insert foam sidewalls with rounded corners into two
ends of mattress. Insert
foam sidewall supports along side of
mattress. Middle of foam rail should bow slightly toward middle
of bed (see illustration B).
Step
2
Place the air
chamber(s) inside the foam siderails. Insert the house through
the holes(s) at head of cover. Unbox air control unit and slide
hose ends from chamber onto plastic pump nozzle (indicated in
illustration
D). Secure hose to fitting by attaching zip lock clamp over hose
nozzle.
Step
3
Plug in the air
unit into electrical outlet and push the button marked firm
until chambers will begin to fill cavity (approximately 70% of
capacity). The chambers will begin to form the slightly bound
sidewalls into their finished straight position. Make sure that
sidewalls are in straight and are pushed out to the edge of
mattress cover.
Step
4
Place convoluted
topper pad on top of air chambers. This pad should only cover
chambers - not out to edge of mattress. Zip top panel of cover
on and inflate to 100% capacity (see illustration F). See
operation for details of using your Comfortaire. |
